Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Glow Inc.

Envirotex Lite Pour-On High Gloss Epoxy


Envirotex Lite Pour-On High Gloss Epoxy


Product Description

Envirotex Lite is a water clear reactive polymer compound. It cures to a thick, glossy coating in about 8 hours at 70°F, and reaches full strength and toughness in about 48 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for a deep attractive finish, however, two or more coats maybe applied one over the other by simply wiping the surface with a clean cloth and alcohol prior to re-coating.

Coverage Information:

  • 4 Oz. Kit: 1 square foot
  • 8 Oz. Kit: 2 square feet
  • Pint Kit: 4 square feet
  • Quart Kit: 8 square feet
  • 1/2 Gallon Kit: 16 square feet
  • Gallon Kit: 32 square feet

Coverage will vary according to surface and method of application. Level the surface. The surface should be up off the work area about 2 inches to allow the coating to drip freely off the sides of the item being coated. Put plastic sheeting, wax paper or multiple layers of newspaper underneath the item being coated to catch drips. The unique self-leveling qualities of EnviroTex Lite® can be attained only by using enough material to flood the surface. It is better to mix a little too much, rather than too little. Mix only as much EnviroTex Lite® as you can pour and spread at one time. Unmixed components should remain in original containers. After pouring you have about 25 minutes working time before EnviroTex Lite® begins to harden.

This CANNOT be shipped outside of the U.S as it must be shipped UPS Ground.  Please note that domestic shipping charges have been added to this product's price.


Product Reviews

Find Similar Products by Category